Heat Resistant Coating
2-3 square meters/KG/coat (two layers)
Low heat capacity
Water-based Heat Resistant Anti-sunshine Coating
Package: 20KG/barrel Color: White and other colors
Theoretical coverage :
3 to 5 square meters/KG/coat(two layer)
3 to 5 square meters/KG/coat(Two layer)
The practical consumption may vary with substrate condition,
construction methods, environment and other factors.
Storage Condition: Store in cool, dry and ventilated place,away from fire.
SAILI Heat insulation flexibility exterior coating adopts advanced
aerospace adiabatic technology. It can form excellent adiabatic
coating with “three high and one low” properties: high
reflectivity, high emissivity, high heat resistivity and low heat
capacity, which can low the surface and inner temperatures of the
substrate, and cut down by thirty percent of the electrical energy
consumed by airconditioner. The energy-saving effect is obviously.
Scope of application:
Can be used for the surface of concrete floor and walls, container
need to isolate the solar thermal radiation.
Theoretical consumption of paint: 3~4 Square meter/L, (two layer,
0.2~0.3mm dry film thickness the practical dosage may vary with
substrate condition, construction methods and other factors.
No more than ten percent of water needs to be added to dilute for
the sake of application convenience.
Dry for more than two hours before subsequent application (25°C,
seventy percent of relative humidity).
White is recommended, and can be adjusted with water-based
colourant if necessary.
Can be used by brushing, rolling or spraying.
Construction procedure of wall:
Construct exterior wall putty for 2~3 times → brush exterior wall
special primer 1 time → brush thermal insulation coatings 2 times →
Substrate surface should be clean, dry, smooth, firm, no grease and
no rust, etc., the water content of cement-based surface should not
exceed 10%, and PH value should below 10.
Application temperature 5~40 °C, the maximum relative humidity
should be less than 85%. Avoid application on windy, rainy, foggy
and high air temperature weather. After coating, keep away from
rain more than 3 hours.